Respiratory Protection

56 products

Related searches

Respiratory Protection: Masks, Respirators and Filters

Shop respiratory protection from Maxisafe, PIP, Pro Choice Safety and Force 360 at At The Coalface Workwear & Safety. Disposable P2 masks, half face and full face respirators, replacement filters and powered air respirators for dust, silica, asbestos, paint, gases and welding fumes.

Choose disposable P2 flat fold masks and dust masks with valves, reusable silicone half mask respirators sold as kits with filters, full face masks, and particulate and combination filters such as P2, P3, A2P2 and ABEK1P2. For long shifts or welding, powered air purifying respirator (PAPR) kits such as Maxisafe CleanAIR reduce breathing effort and can be paired with a welding helmet or hard hat and visor.

The right respirator depends on the hazard, its concentration and a good face fit, so a fit test is recommended for tight fitting masks. Check each product page for its filter type and standard.

Browse respirator masks, filters and welding gear, or pair with eye and face protection. Free shipping on orders over $200.

Frequently asked questions about respiratory protection

What is the difference between P1, P2 and P3?

P1, P2 and P3 are particulate filter classes. P2 is the common choice for dust, silica, mould and smoke from mechanical and thermal processes, while P3 gives the highest particulate protection and is normally used with a full face mask or powered air respirator.

What do A, B, E and K filters protect against?

These are gas and vapour filter types: A for organic vapours such as solvents, B for inorganic gases, E for acid gases and K for ammonia. A combination filter such as ABEK1P2 covers all four plus P2 particles.

Which mask should I use for silica or asbestos dust?

P2 respirators are commonly used for silica and asbestos dust, with higher protection such as P3 or a PAPR needed for some tasks. Always follow your site's risk assessment and the relevant regulations.

Do I need a fit test?

Tight fitting respirators only protect properly when they seal to your face, so a fit test is recommended. Facial hair under the seal stops a tight fitting mask from working.

What is a PAPR?

A powered air purifying respirator uses a battery powered fan to push filtered air into a hood, helmet or mask. It reduces breathing effort and suits long shifts, welding and workers who cannot get a seal with a tight fitting mask.